河南附近有没有服务

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

News and information

Clean the equipment in time after the operation of the fine sand reclaimer is completed

Author: admin Release time: 10:19, December 18, 2019 Number of visits:

   Fine sand Reclaimer Yes, new environmental sand washing equipment. Fine sand reclaimer is often in contact with sand and water and will inevitably rust. The corrosion of fine sand reclaimer will seriously affect the production efficiency. What should we do?

The fine sand reclaimer is corroded due to the following three reasons. First of all, the dehydration materials of fine sand recovery machine are mostly corrosive, so this situation can not be avoided. However, as long as the equipment is cleaned in time after operation, the occurrence of rust can be reduced.

The operator may clean the fine sand reclaimer from time to time or may not clean at all. Cleaning the equipment may cause corrosion and rust of the remaining materials in the equipment.

The production environment of fine sand reclaimer is very bad, most of them are in outdoor environment. When exposed to high temperature, sun, rain or snow, the metal surface of fine sand recovery machine is easy to oxidize and rust in cold and humid environment. Therefore, our customers should pay special attention to the maintenance of fine sand reclaimer in harsh environment.

Descaling technique 1: compressed air descaling. The compressed air and appropriate rust removal device can reciprocally move or rotate to meet the different needs of rust removal. If the diagonal grinding wheel, wire brush, pneumatic needle beam and pneumatic rust removal are carried out, the efficiency of rust removal and paint scraping can be greatly improved compared with manual rust removal, which can reach 1 ~ 2M2 / h, but the surface roughness of oxide scale can not be removed. Small volume, can be used to achieve high quality, efficient surface treatment. It can be used anywhere, especially during maintenance.

Rust removal technology 2: high pressure water removal. Use high pressure water brush equipment. The characteristics of this technology are no dust pollution, no damage and greatly improved efficiency. However, there is a great influence on the corrosion resistance of the coating after the coating is removed from the coating and the corrosion area is also affected.