河南附近有没有服务

eighteen billion six hundred and thirty-seven million three hundred and two thousand and ninety-nine

News and information

The motor is the main power of the whole fine sand reclaimer system

Author: admin Release time: 16:14, December 10, 2019 Number of visits:

In spite of Fine sand Reclaimer The installation of fine sand reclaimer in the system is not very complicated and confidential, but we have to prepare before installation. During the installation process, the necessary tools must be planned and prepared to make them smoother. Install equipment to ensure smooth operation. In order to lay a good foundation for future work, let's take a look at what needs to be done when installing the fine sand reclaimer system.

First of all, we must check the power supply board of the motor to see if it meets the requirements of the fine sand reclaimer system. The motor is the main power of the whole sand making machine system, which is very important.

2. Check the production condition of machine parts carefully to prevent loosening and damaging the machine during operation.

3. Check the condition of the motor carefully to see if there is any damage, deformation and parameter configuration.

4. The insulation resistance is measured with 500 V megohmmeter, and the corresponding stator winding is dry enough. The drying temperature shall not exceed 120 ℃.

5. Test whether the operation of the whole set of fine sand recovery machine is flexible and stable, and eliminate abnormal conditions.

6. Control the use of power supply without phase loss, but not too much.

The preparation before installing these fine sand reclaimers is very important. Don't underestimate them, don't be careless, and do these things well. The installation of the fine sand reclaimer is not only smoother, but also the operation of the fine sand reclaimer system will be more successful. Stable and efficient, without affecting working hours, providing more support for the company.

Regular refueling will greatly extend the service life of the equipment. For some usually idle fine sand recovery machine, should also pay attention to maintenance. You can take some maintenance measures for unused parts in the fine sand reclaimer. These parts are mainly used to prevent rust. There is a special person to look after and maintain.

Some fine sand reclaimers can be replaced in time. Like any machine, it has a lifetime. As usage increases and time goes by, we will find that the equipment will continue to age. In this case, the possibility of failure will be greatly increased. The corresponding maintenance costs will continue to increase. Compared with traditional machinery, you may want to replace it with a new fine sand reclaimer. If we use old production equipment, it will reduce the company's production efficiency and affect our production schedule.